How to Switch BUSH 80W Soundbar to Bluetooth Mode Without the Remote

Lost your remote or can’t find it? No problem. If you’re trying to use Bluetooth mode on your BUSH 80W Soundbar with Subwoofer and the only control you have is the button on the right side, here’s how to change the input mode — even without the remote.

🟠 What the Red Light Means

If your soundbar is showing a solid red light, it typically means the soundbar is either:

• In standby mode, or
• Set to a non-active input, such as optical or coaxial, with no signal.

To use Bluetooth mode, you’ll need to switch the input manually.

🔁 Switching Modes Using the Button

Most BUSH soundbars with a single side button use that button as a multi-function control. Here’s how to toggle through modes:

1. Find the Button:
   Locate the power/input button on the right side of the soundbar. It may feel like a small, pressable circle or rectangle.
2. Turn It On:
   If the red light is solid and the soundbar seems off, press and hold the button for 2–3 seconds to power it on.
3. Toggle Input Modes:
   • Once the soundbar is on, tap the button (do not hold it) to cycle through input modes.
   • Each press will change the mode — usually from AUX → Optical → USB → Bluetooth.
   • You may hear a tone or see a flashing blue light when Bluetooth mode is active.
4. Watch for the Blue Light:
   When the soundbar enters Bluetooth mode, the LED indicator will usually change to blue and flash, indicating it’s ready to pair.

📱 Pairing Your Device via Bluetooth

Once you’re in Bluetooth mode and see the blue flashing light:

1. Open Bluetooth settings on your phone, tablet, or smart TV.
2. Look for a device named something like “BUSH Soundbar” or “BUSH BT”.
3. Tap to connect. You may hear a chime or see the light turn solid once paired.

📌 Quick Tips:

• If the light stays red no matter what, try unplugging the soundbar from the power source for 30 seconds, then plug it back in and repeat the steps.
• Some models may take a few seconds to switch between modes — be patient with each tap.
• If the soundbar pairs but no sound plays, make sure your device’s volume is up and that it is set to output audio via Bluetooth.

✅ Final Thoughts

Using your BUSH 80W Soundbar with Subwoofer in Bluetooth mode without the remote is easy once you know how to toggle the input using the side button. This trick works for many BUSH soundbar models that rely on one multifunction button.

Lost your remote? No stress – just follow the steps above and enjoy wireless audio in minutes.